Medicube Age-R Booster Pro vs NuFACE TRINITY+: Which Is Better for Aging Skin?

If you’re comparing the Medicube Age-R Booster Pro and the NuFACE TRINITY+, you’ve probably noticed they get lumped together in a lot of “best beauty devices” roundups. In reality, they’re built around two different ideas. Medicube is a multi-function device that leans into product absorption, pore care, and glow, while NuFACE is a dedicated microcurrent system built specifically for facial toning and lifting. Both sit in the $200–$500+ range depending on the kit you choose, so this isn’t an impulse buy for most people.

The right pick really comes down to what you’re trying to fix: a slack jawline and sagging cheeks call for a different tool than dullness, congested pores, or poor product absorption. Below, we break both devices down goal by goal — including where their technology overlaps, where it doesn’t, and what you can realistically expect from either one.

Quick Comparison

Feature	Medicube Age-R Booster Pro	NuFACE TRINITY+
Core technology	Electroporation, microcurrent (MC), EMS, sonic vibration, LED	Microcurrent (with optional LED attachment)
Main purpose	Multi-function skincare: absorption, glow, pore care, mild toning	Dedicated facial toning and lifting
Main modes	Air Shot, Booster, MC, Derma Shot	Microcurrent glide/hold routine; interchangeable attachments
Microcurrent	Yes (MC mode)	Yes (primary technology)
EMS	Yes (Derma Shot mode)	No
LED	Yes, built in	Optional, via separate attachment
Product absorption focus	Strong (Booster/electroporation mode)	Not a primary focus
Pore/texture focus	Yes (Air Shot mode)	Not a primary focus
Facial toning	Secondary benefit	Primary benefit
Jawline/cheek focus	Moderate	Strong
Conductive product required	No — works with regular skincare	Yes — requires activator gel/cream
Treatment time	~5–10 minutes per mode, per manufacturer instructions	~5 minutes per session, per manufacturer instructions
Recommended frequency	1–3x daily (Air Shot 2–3x weekly), per manufacturer	5 days/week initially, then 2–3x weekly for maintenance, per manufacturer
App support	AGE-R app (Bluetooth, remote control, routine tracking)	NuFACE Smart App (guided routines, tutorials)
Attachments	Single multi-mode head	Interchangeable heads (Wrinkle Reducer, Effective Lip & Eye, etc.) sold with Complete kits or separately
Approximate price	~$200–$230 for the device (check current Amazon price)	~$325–$400 for Starter Kit; ~$470–$600 for Complete sets (check current Amazon price)
Ongoing costs	Uses your existing skincare — no required refills	Conductive gel/activator is a recurring cost
Best suited to	Multi-concern skin, absorption/glow, pores	Dedicated toning, jawline/cheek contour
Main limitation	Microcurrent and EMS are secondary to other functions	No pore, texture, or product-absorption function

Prices vary by retailer and bundle, so [see current Amazon price for the Medicube Age-R Booster Pro] or [check the latest Amazon price for NuFACE TRINITY+] before deciding.

Medicube Age-R Booster Pro: What You Actually Get

The Booster Pro is a six-in-one device combining electroporation, microcurrent, EMS, LED, and sonic vibration, according to Medicube’s official product listing. In practice, you use it through four selectable modes:

• Air Shot Mode — intended to refine the look of pores and smooth uneven texture, used 2–3 times a week per the manufacturer.
• Booster Mode — an electroporation mode meant to push skincare actives deeper into the skin and support a more radiant look, used up to three times daily.
• MC Mode — the microcurrent setting, marketed for a lifted, contoured look.
• Derma Shot Mode — an EMS setting intended to relax facial muscles and support elasticity.

Medicube reports (manufacturer claim, not independently verified) that skin permeability improved substantially in internal testing when Booster Mode was paired with their skincare line. Take that figure as brand-reported, not a third-party clinical result.

The upside of this many functions is flexibility — one device can pinch-hit for a serum-boosting tool, a pore-refining tool, and a light toning tool. The downside is that no single function gets the same dedicated power as a device built around just one technology. If your main concern is genuinely sagging skin or muscle tone, the MC and Derma Shot modes here are a bonus, not the star feature. Our full Medicube Booster Pro review covers the mode-by-mode routine in more depth.

NuFACE TRINITY+: What You Actually Get

The TRINITY+ is built entirely around microcurrent — a low-level electrical current NuFACE describes as working across three depths, delivered via glides and holds along the jawline, cheeks, and forehead, per NuFACE’s official product page. It requires a conductive Aqua Gel or Silk Crème activator to work — skip the gel and the microcurrent won’t transfer properly to the skin.

A Boost Button adds roughly 25% more microcurrent output for targeted areas, and the device pairs with the NuFACE Smart App for guided routines and tracking (the app is still active as of this writing — worth double-checking in the App Store, since features do get updated). Depending on the kit, TRINITY+ comes with interchangeable attachments: a Wrinkle Reducer (red LED), an Effective Lip & Eye head for targeted areas, or both in the Complete set.

There’s no pore, texture, or product-absorption function here — it’s a single-purpose tool. That focus is exactly why people who care primarily about facial toning tend to prefer it over multi-function competitors. Our NuFACE TRINITY+ review walks through the full routine and attachment options.

Medicube vs NuFACE: How the Technologies Differ

Microcurrent delivers a very low electrical current intended to stimulate facial muscles gently, similar to passive exercise. Both devices include it, but it’s the entire point of NuFACE and just one of four modes on the Booster Pro.

EMS (electrical muscle stimulation) uses a stronger current than microcurrent and is meant to trigger visible muscle contraction — that’s the Booster Pro’s Derma Shot mode. NuFACE does not use EMS. Microcurrent and EMS are not interchangeable terms — microcurrent works below the threshold of sensation, while EMS causes an actual muscle twitch. Confusing the two overstates what either device does.

Electroporation (Medicube’s Booster mode) uses electrical pulses to temporarily increase skin permeability, which is intended to help skincare ingredients absorb more effectively — this has nothing to do with muscle toning.

LED: Medicube’s is built in as one of its six functions; NuFACE’s is an optional add-on attachment, not part of the base device.

Sonic vibration on the Booster Pro is a mechanical, non-electrical function meant to aid product distribution and provide a massage-like sensation.

None of these technologies produce the same type of result — electroporation supports absorption, EMS/microcurrent target muscle tone, and LED targets tone and texture over time.

Which Is Better for Aging Skin?

If your main goal is jawline definition: NuFACE’s dedicated microcurrent routine, with glides specifically along the jawline, is the more targeted tool. Medicube’s MC mode offers a lighter version of the same technology as part of a broader routine.

If your main goal is facial toning overall: NuFACE is purpose-built for this. Medicube can contribute via MC and Derma Shot modes but treats toning as one feature among several.

If your main goal is fine lines: Both may help modestly — Medicube through LED and electroporation-assisted product absorption, NuFACE through microcurrent’s reported effect on surface-level smoothing. Neither eliminates lines; expect subtle change at best.

If your main goal is glow and product absorption: This is where Medicube’s Booster mode has a clear edge — NuFACE has no electroporation function.

If your main goal is pores and texture: Medicube’s Air Shot mode targets this directly; NuFACE doesn’t address pore appearance at all.

If you want the simplest routine: NuFACE requires activator gel every session and a set glide pattern; Medicube works with your existing skincare and switches modes with one button, though remembering which mode order to use adds its own learning curve.

If you’re over 40: Multiple concerns (jawline, texture, glow, mild sagging) often coexist, so see the dedicated section below.

Results: What Can You Realistically Expect?

Immediately after a session: Users may notice a temporary tightened or “lifted” look (more associated with microcurrent/EMS) or a temporary glow and smoother texture (more associated with electroporation and LED). These effects are typically short-lived.

After several weeks of consistent use: Manufacturer-reported and consumer-reported outcomes suggest gradual improvements in the appearance of skin tone, texture, and mild sagging with regular use — but “improvement” here means visibly better, not clinically reversed aging.

Long-term: Both devices require ongoing use to maintain results. Stopping use is generally reported to return skin toward its baseline appearance over time, similar to stopping a fitness routine.

Neither device produces permanent lifting, guaranteed wrinkle removal, or Botox-like or surgical-level results. Think of both as maintenance tools, not corrective treatments.

Science and Evidence: What Does the Research Actually Say?

There’s a growing but still limited body of independent research on home-use beauty devices. A 2024 systematic review in Clinical, Cosmetic and Investigational Dermatology looked at 18 clinical studies on home devices using radiofrequency, microcurrent, and LED, and found these technologies can improve signs of skin aging to some degree, with adverse effects generally limited to transient redness or swelling — though the authors noted small sample sizes and short follow-up periods across the field (source). Separately, dermatology guidance on red-light LED devices notes that studies show subtle-to-noticeable improvements in fine lines, texture, and discoloration with consistent use (American Academy of Dermatology).

Importantly, none of this research is a head-to-head study of the Medicube Booster Pro against the NuFACE TRINITY+ — there isn’t one. Evidence on similar technologies in other devices shouldn’t be treated as proof either product performs identically. It’s also worth separating FDA clearance from proof of effectiveness: FDA 510(k) clearance means a device is substantially equivalent to an already-legally-marketed device on safety grounds — it is not a stamp of guaranteed anti-aging results.

Cost of Ownership: The Price Is More Than the Device

• Medicube Age-R Booster Pro: The device typically runs around $200–$230 depending on retailer and promotions. It uses whatever serums or moisturizers you already own — no required conductive gel — so ongoing costs are mainly whatever skincare you were already buying.
• NuFACE TRINITY+: Starter Kits run roughly $325–$400, with Complete sets (extra attachments) closer to $470–$600. TRINITY+ requires its Aqua Gel or Silk Crème activator to function, which is a recurring purchase — exact refill frequency and cost will depend on how often you use the device, and we can’t verify precise monthly figures.
• Attachments: Medicube’s core device is single-head; extra attachments for NuFACE (Wrinkle Reducer, Effective Lip & Eye) are sold separately if not included in your kit and add to total cost.
• Warranty/returns: Check current retailer policy at time of purchase, as these vary.

A cheaper upfront device (Medicube) can end up costing less over time if you don’t factor in NuFACE’s required activator gel — but NuFACE’s dedicated toning focus may be worth that added cost if facial contour is your main priority.

Ease of Use and Daily Routine

Medicube routine:

1. Cleanse skin.
2. Use Air Shot Mode on dry skin if pore refinement is a goal (2–3x/week).
3. Apply your regular serum or moisturizer.
4. Glide the device using Booster, MC, or Derma Shot mode per instructions (manufacturer recommends using them in sequence: Air Shot → Booster → MC → Derma Shot).
5. Finish with the rest of your skincare routine.

NuFACE routine:

1. Cleanse skin.
2. Apply the Aqua Gel or Silk Crème activator to the treatment area.
3. Glide the device in the manufacturer’s recommended pattern across cheeks, jawline, and forehead, using the Boost Button as needed.
4. Follow the recommended frequency (5 days/week initially, tapering to 2–3x/week for maintenance).
5. Clean the device head after use.

Pros and Cons

Medicube Age-R Booster Pro Pros

• Six functions in one device covers multiple concerns
• No conductive gel required — works with skincare you already own
• Includes LED and sonic vibration at no extra cost
• App connectivity for tracking routines

Medicube Age-R Booster Pro Cons

• Microcurrent/EMS power is secondary to its other functions
• Multiple modes can feel complicated for beginners
• Not designed specifically for deep facial contouring
• Manufacturer percentage claims aren’t independently verified

NuFACE TRINITY+ Pros

• Purpose-built, dedicated microcurrent technology
• FDA-cleared as a Class II device
• Boost Button and interchangeable attachments for targeted areas
• Well-established brand with a long clinical/consumer track record

NuFACE TRINITY+ Cons

• Requires recurring conductive gel/activator purchases
• Higher upfront price, especially for Complete sets
• No pore, texture, or absorption-boosting function
• Attachments beyond the base kit cost extra

Who Should Consider Medicube Age-R Booster Pro?

Medicube fits someone who wants one device to cover several skincare goals — glow, pore refinement, and light toning — rather than a device dedicated solely to lifting. It also suits people who don’t want to buy a separate conductive gel and would rather use the serums already in their routine. If facial contouring is your only concern, though, its toning power is a secondary feature, not its strength.

Who Should Consider NuFACE TRINITY+?

NuFACE fits someone whose primary complaint is a softening jawline, sagging cheeks, or general loss of facial tone, and who wants a device built specifically to address that. It also suits people who like the idea of expandable attachments and a structured, guided routine through the app. It’s a poor fit for someone whose main concerns are pores, texture, or product absorption, since it doesn’t address those at all.

Which One Makes More Sense for Women Over 40?

Aging skin is rarely a single problem — mild sagging, jowls, cheek volume loss, fine lines, uneven texture, and dullness often show up together. That means no single device, including these two, addresses every aspect of facial aging on its own.

• If jawline and cheek contour are your biggest concern, NuFACE’s dedicated microcurrent approach is more targeted.
• If dullness, pore appearance, and product absorption bother you as much as mild sagging, Medicube’s broader function set may serve more of your goals in one device.
• Neck appearance and jowls are areas both devices’ manufacturers reference in their instructions, but neither should be expected to meaningfully reverse jowling or loose neck skin — that’s outside what either device is designed to do.

Consistency matters more than device choice here: neither works well as an occasional-use gadget. See our guide to the best at-home facial lifting devices for women over 40 for more device-by-device context.

Safety and Who Should Avoid These Devices

Follow each manufacturer’s exact instructions, including recommended frequency and intensity levels. Common contraindication categories for facial electrical devices generally include pregnancy, implanted electronic devices (such as pacemakers), active skin conditions like cystic acne, rosacea, or eczema in the treatment area, and recent injectables or procedures. If any of these apply to you, check the specific manufacturer’s safety documentation and speak with a dermatologist or qualified healthcare professional before use. This isn’t personalized medical advice — just a starting point for the conversation with your provider.

Medicube Age-R Booster Pro vs NuFACE TRINITY+: Final Buying Guide

Choose Medicube if your priorities are:

• Multi-function skincare in one device
• Product absorption and glow
• Pore and texture care
• Using your existing skincare products (no conductive gel)

Choose NuFACE if your priorities are:

• Dedicated microcurrent facial toning
• Jawline and cheek contour as your main concern
• A structured, guided microcurrent routine
• Expandable attachments for targeted areas

Before buying either one, ask yourself:

1. What is my main skin concern — toning, absorption, texture, or a mix?
2. Will I realistically use this device several times a week, consistently?
3. Am I comfortable adding a conductive gel step to my routine?
4. Do I want multiple technologies in one device, or one technology done well?
5. What’s my real total budget, including any recurring products?
6. Do I want interchangeable attachments?
7. Am I expecting a cosmetic improvement, or hoping for a surgical-level result? (Only the former is realistic.)

FAQ

Is Medicube Age-R Booster Pro better than NuFACE TRINITY+?
Neither is universally better — it depends on your goal. NuFACE is the stronger pick for dedicated facial toning; Medicube is the stronger pick if you want absorption, glow, and pore care alongside light toning.

What is the main difference between Medicube and NuFACE?
Medicube is a six-function multi-purpose device; NuFACE is a dedicated microcurrent toning system.

Is Medicube Age-R Booster Pro a microcurrent device?
It includes microcurrent as one of four modes (MC Mode), but it isn’t solely a microcurrent device.

Does Medicube Booster Pro use EMS?
Yes — Derma Shot Mode uses EMS, which is a different technology from microcurrent.

Does NuFACE TRINITY+ require conductive gel?
Yes, its Aqua Gel or Silk Crème activator is required for the device to work as intended.

Which device is better for a sagging jawline?
NuFACE’s dedicated microcurrent routine is more targeted for jawline and cheek contour.

Which is better for wrinkles?
Both may offer modest improvement — Medicube through LED and electroporation-assisted absorption, NuFACE through microcurrent — but neither eliminates wrinkles.

Can you use Medicube and NuFACE together?
There’s no official guidance combining the two brands, and no evidence using both provides added benefit over either alone. If you do try both, space out sessions and follow each manufacturer’s instructions separately.

How often should you use NuFACE TRINITY+?
The manufacturer recommends about 5 days a week initially, then 2–3 times weekly for maintenance.

Is Medicube Age-R Booster Pro worth the price?
That depends on whether you’ll use its full range of modes. If you only want toning, a dedicated device may serve you better; if you want absorption, glow, and pore care too, its multi-function design adds real value.

---

For more on this category, see our roundup of the 5 best microcurrent devices for wrinkles and facial toning, our NuFACE MINI+ review if you want a smaller, more portable option, or 7 best LED face masks for wrinkles and anti-aging if LED is your main interest.